![[metaslider id="13913"]
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Instructions.pdf">HERE</a> for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, springs and tank filler caps</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2018/09/cropped-Hardys-Hobbies-Banner-2.jpg "Hudswell Clarke PLA Class 0-6-0T")
![[metaslider id="13913"]
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Instructions.pdf">HERE</a> for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, springs and tank filler caps</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Product-scaled.jpg "Hudswell Clarke PLA Class 0-6-0T")
Hudswell Clarke PLA Class 0-6-0T
#LB_0018
£45.00
![[metaslider id="13913"]
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Instructions.pdf">HERE</a> for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, springs and tank filler caps</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-01-scaled.jpg "Hudswell Clarke PLA Class 0-6-0T")
![[metaslider id="13913"]
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Instructions.pdf">HERE</a> for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, springs and tank filler caps</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-02-scaled.jpg "Hudswell Clarke PLA Class 0-6-0T")
![[metaslider id="13913"]
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-Instructions.pdf">HERE</a> for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, springs and tank filler caps</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2021/08/LB_0018-03-scaled.jpg "Hudswell Clarke PLA Class 0-6-0T")
The Hudswell ‘PLA’ tank was designed for the Port of London authority for working the dock lines in London. They were similar to the 1800 class but featured a sloping bunker, wider cab to match the tank width and square cut our rear cab windows.
This kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Electrotren/Jouef outside cylinder 0-6-0 chassis. Please see the instruction sheet HERE for notes about the chassis and minor modifications that may be required to made on some variants.
Included in the kit are:
- Main body
- Separate cab roof, backhead, springs and tank filler caps
- Handrail knobs and wire
- Smokebox door dart
- NEM Couplings
- Cosmetic drawhooks
- Footplate crew (from our own range)
- Fixing nuts and bolts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.
This item is printed to order. Orders will take up to 4 weeks to be shipped.
