![[metaslider id="10690"]
The engine makers of Hudswell Clarke & Co produced a variety of 0-6-0 saddle tank locomotives to a series of simple base designs. One of these is the “Italia” class engines with 14 x 20” cylinders
These locomotives proved ideal for industrial and light railway settings.
This model represents ‘Walton Park’ as used on the East Kent Railway in post-1937 condition with larger chimney and subsequent industrial service.
This kit could also be used for generic industrial locomotives with a larger chimney and curved smokebox door hinge.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby B2 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0013A-HC-Italia-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, and sandboxes (square and round style)</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nut and bolt</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2018/09/cropped-Hardys-Hobbies-Banner-2.jpg "Hudswell Clarke Italia Class 0-6-0 'Walton Park' Post 1937")
Locomotive Body Kits
-
![[metaslider id="10690"]
The engine makers of Hudswell Clarke & Co produced a variety of 0-6-0 saddle tank locomotives to a series of simple base designs. One of these is the “Italia” class engines with 14 x 20” cylinders
These locomotives proved ideal for industrial and light railway settings.
This model represents ‘Walton Park’ as used on the East Kent Railway in post-1937 condition with larger chimney and subsequent industrial service.
This kit could also be used for generic industrial locomotives with a larger chimney and curved smokebox door hinge.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby B2 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0013A-HC-Italia-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, and sandboxes (square and round style)</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nut and bolt</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0013B-Product-300x300.jpg "Hudswell Clarke Italia Class 0-6-0 'Walton Park' Post 1937")
Hudswell Clarke Italia Class 0-6-0 ‘Walton Park’ Post 1937
#LB_0013B -
![[metaslider id="10685"]
The engine makers of Hudswell Clarke & Co produced a variety of 0-6-0 saddle tank locomotives to a series of simple base designs. One of these is the “Italia” class engines with 14 x 20” cylinders
These locomotives proved ideal for industrial and light railway settings.
This model represents ‘Walton Park’ as used on various Col. Stephens light railways in pre-1937 condition with slimmer chimney. This kit could also be used for generic industrial locomotives with a slim chimney and curved smokebox door hinge.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby B2 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0013A-HC-Italia-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, and sandboxes (square and round style)</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nut and bolt</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0013A-Product-300x300.jpg "Hudswell Clarke Italia Class 0-6-0 'Walton Park' Pre 1937")
Hudswell Clarke Italia Class 0-6-0 ‘Walton Park’ Pre 1937
#LB_0013A -
![[metaslider id="9850"]
Robert Stephensons and Hawthorn Ltd was formed after Robert Stephenson and Co took over the loco building arm of Hawthorne Leslie & Co. They produced a slightly updated variant of the Hawthorne 14” saddle tank locomotives which in turn had partial ancestry at from Bagnall’s in Staffordshire.
Although similar these engines differed from their Bagnall cousins, featuring different tank filler locations, handrails, sandboxes and cab profile.
These locomotives proved to be pocket rockets – small, compact and very powerful which found them favour in heavy industry, power stations and the Ministry of Supply.
This model would look perfectly at home shunting any steelworks, factory, wharf, private siding or any other industrial setting. A number have also been preserved on UK heritage railways.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/04/LB_0012-14in-RSH-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, and sandboxes</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/04/LB_0012_Product-300x255.jpg "14in RSH 0-4-0ST")
14in RSH 0-4-0ST
#LB_0012 -
![[metaslider id="9845"]
The firm of W G Bagnall produced 0ver 1600 locomotives at their Castle Engine Works in Staffordshire. Amongst these were the popular standard gauge 14” 0-4-0 saddle tanks.
These locomotives proved to be pocket rockets – small, compact and very powerful which found them favour in heavy industry, power stations and the Ministry of Supply.
This model would look perfectly at home shunting any steelworks, factory, wharf, private siding or any other industrial setting. A number have also been preserved on UK heritage railways and one in France.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/04/LB_0011-14in-Bagnall-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
<ul>
<li>Main body</li>
<li>Separate cab roof, backhead, and sandboxes</li>
<li>Handrail knobs and wire</li>
<li>Smokebox door dart</li>
<li>NEM Couplings</li>
<li>Cosmetic drawhooks</li>
<li>Footplate crew (from our own range)</li>
<li>Fixing nuts and bolts</li>
</ul>
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/04/LB_0011-Product-300x239.jpg "14in Bagnall 0-4-0ST")
14in Bagnall 0-4-0ST
#LB_0011 -
![[metaslider id="9392"]
During the 1920s and 1930s the Sentinel Waggon Works produced a number of small vertical boilered, geared steam locomotives for industrial use. Available in gauges from 3’ to 5’ 6” the locomotives were designed to raise steam quickly, be easy to operate and maintain and work over less than desirable track and curves where other engines – including diesels- may struggle. The engines found favour with industrial users and one even found its way into LMS and BR use. Many lasted well into the diesel era making them suitable for a wide modelling timeframe.
The model would look perfectly at home shunting a factory, wharf, private siding or other light or medium industrial setting.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby 48DS chassis. Which requires no modification. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/02/LB_0010-Pre-war-100hp-Sentinel-Instructions.pdf">here</a> for more information on assembly.
Included in the kit are:
• Main body
• Separate cab roof, sandboxes and optional toolboxes
• Handrail wire
• NEM Couplings
• Cosmetic drawhooks
• Footplate crew (from our own range)
• Fixing nuts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/02/LB_0010-01-300x291.jpg "100HP Sentinel – Pre-War Version")
100HP Sentinel – Pre-War Version
#LB_0010 -
![[metaslider id="9488"]
The Leeds firm of Manning Wardle & Co undoubtfully built some of the prettiest industrial steam locomotives. With their long chimneys and high saddletanks the Manning Wardle style earnt them a top class reputation.
The H Class 0-4-0 locomotives were popular designs with many being built for use by Contractors and Industrial users. The firm specialised in providing engines to exactly meet a customers needs by modifying them as required at the time of building creating a “special” engine.
This model contains features found on later style engines like a straight back cab and conventional smokebox door. The model would look perfectly at home shunting a factory, wharf, private siding or even hauling passenger trains on a light railway.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/03/LB_0009C-Manning-Wardle-H-Class-Cabbed-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
• Main body
• Separate cab roof, backhead, sandboxes and optional toolboxes
• Handrail knobs and wire
• Smokebox door dart
• NEM Couplings
• Cosmetic drawhooks
• Footplate crew (from our own range)
• Fixing nuts and bolts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/03/LB_0009C-01-300x292.jpg "Manning Wardle H Class 0-4-0ST (Straight Back Cab)")
Manning Wardle H Class 0-4-0ST (Straight Back Cab)
#LB_0009C -
![[metaslider id="10278"]
The Leeds firm of Manning Wardle & Co undoubtfully built some of the prettiest industrial steam locomotives. With their long chimneys and high saddletanks the Manning Wardle style earnt them a top class reputation.
The H Class 0-4-0 locomotives were popular designs with many being built for use by Contractors and Industrial users. The firm specialised in providing engines to exactly meet a customers needs by modifying them as required at the time of building creating a “special” engine.
This model features a curved back cab as found on some engines.
The model would look perfectly at home shunting a factory, wharf, private siding or even hauling passenger trains on a light railway.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/03/LB_0009C-Manning-Wardle-H-Class-Cabbed-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
• Main body
• Separate cab roof, backhead, sandboxes and optional toolboxes
• Handrail knobs and wire
• Smokebox door dart
• NEM Couplings
• Cosmetic drawhooks
• Footplate crew (from our own range)
• Fixing nuts and bolts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0009B_Product-300x300.jpg "Manning Wardle H Class 0-4-0ST (Curved Back Cab)")
Manning Wardle H Class 0-4-0ST (Curved Back Cab)
#LB_0009B -
![[metaslider id="10261"]
The Leeds firm of Manning Wardle & Co undoubtfully built some of the prettiest industrial steam locomotives. With their long chimneys and high saddletanks the Manning Wardle style earnt them a top class reputation.
The H Class 0-4-0 locomotives were popular designs with many being built for use by Contractors and Industrial users. The firm specialised in providing engines to exactly meet a customers needs by modifying them as required at the time of building creating a “special” engine.
This model contains features found on early style engines like an open cab with primitive weatherboard to protect the driver and a hinged flap type smokebox door.
The model would look perfectly at home shunting a factory, wharf, private siding or even hauling passenger trains on a light railway.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0009a-Manning-Wardle-H-Class-Open-Cab-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
• Main body
• Separate backhead, sandboxes and optional toolboxes
• Handrail knobs and wire
• Smokebox door dart
• NEM Couplings
• Cosmetic drawhooks
• Footplate crew (from our own range)
• Fixing nuts and bolts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0009A_Product-300x255.jpg "Manning Wardle H Class 0-4-0ST (Open Cab)")
Manning Wardle H Class 0-4-0ST (Open Cab)
#LB_0009A -
![[metaslider id="10243"]
With the expansion of the railway network and the general industrial scene in the late 1800’s a large number of small locomotives were built for use by the various Contractors. Several firms cashed in on this creating small, compact and light weight engines that could run over lightly laid and often poorly kept track and be moved from contract to contract by low loader hauled by a steam powered traction engine.
The firm of Hudswell, Clarke & Co. specialised in such engines producing several versions of small 0-4-0 to suit different environments and budgets!
This model epitomises the Hudswell Contractors design and can be built with either a fully enclosed or open cab. This model also differs from our other similar Hudswell Clarke Contractors Locomotive with eh addition of a flush riveted water tank.
The model would look perfectly at home undertaking contracting work or shunting a factory, wharf, private siding or even hauling passenger trains on a light railway.
This 4mm scale kit comes complete with everything you will need to complete a finished body except for the chassis (and glue + paint).
The model is designed to fit on the Hornby W4 Peckett chassis. Please see the instruction sheet <a href="https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0008AB-Hudswell-Clarke-Contractor-0-4-0-Enclosed-Cab-Instructions.pdf">here</a> for notes about the chassis and minor modifications that may be required.
Included in the kit are:
• Main body
• Separate cab roof, backhead, sandboxes and optional toolboxes
• Handrail knobs and wire
• Smokebox door dart
• Cosmetic drawhooks
• Footplate crew (from our own range)
• Fixing nuts and bolts
This kit is designed for ease of assembly and requires only very simple hand tools, glue, paint and a little patience to complete.](https://hardyshobbies.co.uk/wp-content/uploads/2020/05/LB_0008B_Product-300x278.jpg "Hudswell Clarke Contractor 0-4-0 (Full Cab)")
Hudswell Clarke Contractor 0-4-0 (Full Cab)
#LB_0008B
